Tsarin Matsakaicin Jirgin Sama A cikin dakin gwaje-gwajen Dabbobi

1. An shigar da rundunar iska mai matsa lamba akan rufin ɗakin.Dole ne a bushe iskan da aka danne kuma a tace don tabbatar da tsaftar iskar da aka matsa.Tushen bututun iska yana ɗaukar bututun ƙarfe na galvanized kuma an tsara matsa lamba na bututun don zama 0.8Mpa kuma ƙimar gudana shine 15m/s.Wuraren tsaftaa cikin dakin gwaje-gwaje (ciki har da corridors) suna buƙatar sanye take da na'ura mai haɗa iska, wanda zai iya fesa maganin kashe kwayoyin cuta.Haɗin tasha yana ɗaukar haɗin mai saurin toshewa, wanda ke da nisan 1.3m daga ƙasa kuma kusa da bango.Tsarin iska mai matsewa kuma yana ba da iska mai matsa lamba da ake buƙata don aikin injin tsabtace iska.
2. Ƙayyadaddun fasaha da bukatun kayan aikin kwampreso na iska:
(1) Nau'in: Nau'in akwatin-nau'in mai-free gungurawar iska
(2) Tsarin sarrafawa: sarrafa kayan aiki mai hankali, nunin matsayi na kwampreso, nunin sigar aiki, tunatarwa mai kulawa, sarrafa kwampreso, alamar ƙararrawa ta atomatik, saitin siga
(3) Matsin lamba: 0.8MPa
(4) Ƙarfin ƙyalli: 0.40m³/min, ƙimar karkatacciyar ƙyalli: -3%≤ ƙarar ƙara≤+10%;
(5) Amo: 55dB (A)
(6) Siffar sanyaya: sanyaya iska
(7) Ƙarfin mota: 3.7kW, ƙarfin lantarki: 380V
(8) Matsayin kariyar motoci: IP55
(9) Ajin rufe motoci: F
(10) Don tabbatar da cewa ma'aikatan fasaha za su iya daidai da yadda ya kamata su mallaki aiki da hanyoyin kulawa na kwampreshin iska, mai yin nasara dole ne ya ba da horo na ƙwararru kyauta kuma ya tsara shirin horar da masana'antu na asali.Samar da sabbin bayanai da mujallu na kwampreso iska.
3. Ƙayyadaddun fasaha da buƙatun busassun firiji:
Ƙarfin jiyya: 1.2m³/min, Ƙimar karkatacciyar hanya: -3%≤ Ƙarfin jiyya≤+10%;
(1) Matsin aiki: 1.0MPa
(2) Matsakaicin raɓa: 3-10 ℃
(3) Hanyar sanyaya: sanyaya iska
(4) Na'urar bushewa mai sanyi ta zo da magudanar ruwa ta atomatik
4. Ƙididdigar fasaha da buƙatun don daidaitotacewa
(1) Ƙarfin jiyya: 1.2m³/min, ƙimar karkatar da izini: -3%≤ ƙarfin jiyya≤+10%;
(2) Matsin aiki: 1.0MPa
(3) daidaiton tacewa: abun cikin ƙura ≤0.01um
(4) Tace mai matakai uku tare da magudanar ruwa ta atomatik
5. Ƙididdigar fasaha da buƙatun don tankunan ajiyar gas
(1) Tankin ajiyar iskar gas an yi shi da bakin karfe
(2) Ƙarar: 0.3 m³, ƙimar karkacewa da aka halatta: -3%≤ girma≤+10%;
(3) Matsin aiki: 0.8MPa
(4) Tankin ajiyar iskar gas tare da magudanar ruwa ta atomatik